Jewellery Making using Precious Metal Clay (PMC)
by: Adam Hunter
Total views: 368
Word Count: 513
Since its initial development, Silver Clay has undergone a transformation, making it easier than ever to use. Early examples of the clay needed to be fired at very high temperatures, requiring a kiln to complete the process. Modern metal clays are now capable of being fired in a common kitchen oven or even with a gas blowtorch. Although a kiln is not strictly necessary with modern materials, it is still a useful jewellery workshop item to have, as it enables the user to control the temperature of the firing accurately. Too high and the silver will melt into a blob. Two low and the binder will not burn off completely, leaving the final piece weak.
The early PMC suffered from one major drawback – shrinkage. Modern metal clays are now much more resistant to shrinking during the firing process, making them easier to manipulate into far more delicate and complex patterns. Acceptable levels of shrinkage for modern materials are between 10-15%, depending on the brand.
Metal clay can be thinned with water to make a paste that can be used to join elements, repair cracks and use as a surface texture. Because the clay is very dense, just stirring in additional water will not thin the mixture. The medium has to be mixed, rather like adding thinner to oil paint, with a palette knife. Once the required consistency has been reached, allow the mixture to ‘rest’ in an airtight container for a few hours before use.
Metal clay is perfect for developing texture in a piece, and this can be achieved by simply pressing the pattern into the surface of the clay. Patterned rollers, even leaves or lace can be used to achieve a delicate finish on the surface of the silver piece.
Firing temperatures for the clay are around 1500 degrees F, which is applicable for most types of metal clays. Firing time is around ten minutes, making the use of a small kiln the optimum choice for firing processes.
Once fired, the metal can be soldered, filed, sanded and polished like any other metal, but it is advisable to burnish the surface first to compact the surface structure. Once finished, the piece can be worn like any other piece of silver jewellery.
Silver clay is widely available from jewellery and craft suppliers, the two main brands being Precious Metal Clay (PMC) and Art Clay Silver. Gold clay is available, but its price is prohibitively expensive for novice users. The silver clay is a good starting point when exploring this versatile medium.
Article Source: http://www.ArticleStreet.com/profile/adam-hunter-2945.html
About the Author
Adam Hunter – E-commerce Marketing Manager of cooksongold.com. Cookson Precious Metals offer a choice of jewellery making supplies from over 10,000 products including gold and silver wire, jewellery findings, tools, precious metal clay (PMC) and gold and silver sheet - gold, silver, platinum and palladium plus technical information for jewellers, jobbers, designer, craftsmen, artisans and students. For interviews, quotes, images or comments contact: Adam Hunter E-commerce Marketing Manager Tel(DDI): +44 (0) 121 212 6491 E-mail: adam.hunter@cooksongold.com
Rating: Not yet rated
Latest articles contributed by "Adam Hunter"
1: Argentium Silver - How silver is meant to be2: Jewellery making project ideas - using Sterling Silver Findings
3: How to Solder using Silver Solder and a Butane Torch
4: Finding a good Scrap Gold Buyer
5: Applications for Jewellery Making using Gemstones
6: Guide to Pliers - the Essential Jewellery Making Tool
7: Top Jewellery Making Tips for Silver Soldering
8: Jewellery Making Supplies - Gemstones Explained
9: Jewellery Making Applications of Silver Findings
10: Beat the Credit Crunch - Sell your Scrap Gold